Fuji FCX CII & AII previous version (V4) of pressure transmitters


You will find below information and datasheet about the previous version (version 4) of Fuji Transmitters




Highly precise differential and other pressure, fluid flow, and liquid level measurements with Fuji electronic transmitters.

Since we released our first smart transmitter in late 1980's, with its reliable performance based on our original unique measuring principle, the "ADVANCED FLOATING CELL", Fuji FCX and FCX-A/C transmitters have been chosen by many customers all over the world. Over 500,000 units in various industrial processes and services show excellent reliability and performance of our transmitter.

To respond to increasing demands of reliability and accuracy, we now offer you much more accurate, and flexible series of transmitters -FCX-AII series.



FCX SERIES TRANSMITTER SUPPORT TOOL
[Outline]
FCX Series transmitter support tool contains the software to execute the configurations of FCX-A, FCX-C and FCX-AII series transmitter. If you install this software to the personal computer connected to HART Interface that support HART communication with HART device and then connect pins of HART Interface to FCX-A, FCX-C or FCX-AII series transmitter powered by the power supply, you will be able to confirm the following configurations and change Damping constant, Measuring range and Calibration
- Tag No.
- Model No.
- Serial No.
- Engineering unit
- Measuring range
- Damping constant
- Data (PV value)
- Current
Manufactured in Europe, the FCX transmitter can be fitted with remote seals to suit the most aggresive of applications. Assembly of the seals and transmitters as an integral part of the transmitter allows the assembly to be designed for reduced oil fill volume, which produced unpresidented temperature stability.

To support customers in many industries we supply compete transmitter and chemical seal combinations.
These solutions are manufactured by ourselves with reduced silicon volume to give fast responce with in built temperature compensation.

 

FCX CII Gauge Pressure Transmitter

FCX AII


FCX CII Gauge Pressure Transmitter

Differential Pressure transmitters from Fuji Electric

 

Differential pressure transmitters can be used to measure, flow, density, viscosity and level.

Flow measurement, DP transmitters measure the pressure drop accross orifice plates, venturi tubes, pitot tubes or some other form of primary flow element. In these applications there is a square law relationship between the differential pressure and the flowrate. When specifying a dP transmitter for a flow applications the type of fluid, line pressure and temperature as well as flow trundown should be known.

Fuji Electric have recently released the worlds first DP transmitter which will measure differential pressure at line pressures up to 1035 barg!. This "high static pressure" device is particulary useful in the oil and gas industry as producers drill to new depths to recover product.

Density Measurement, DP transmitters measure the difference in pressure between two points in a vertical plane. The density being proportional to the difference in pressure.

Viscosity Measurement, in this application a fixed flowrate is pumped through an orifice plate at a constant rate using a positive displacement pump at a known telperature and pressure. By measuring the differential pressure accross the orifice plate, the viscosity of the fluid can be measured.

Level Measurement, in this application the level in a sealed tank can be measured by comparing the pressure at the top of the tank, with the pressure at (or near) the bottom of the tank. fuji Electric DP transmitters have the capability to compensate for tanks with irregular shapes.

For transmitters to suit any of the above applications, please dont hesitate to contact us.

 

Other transmitters in the Fuji Electric range are ssure and Differential Pressure Transmitters available from Fuji Electric

The FCX range of pressure transmitters can be summarised as follows

Family Type Accuracy Model
 


Download Listing

Listing Downloads 1 to 10 of 14

1
AII - IMFCXA2 (1532 KB)
CII - IMFCXC2 (1382 KB)
HHC - EDS8-47n (149 KB)
AII  - A2SERIE (457 KB)
CII  - C2SERIE (479 KB)
HHC - IMFXWf (555 KB)
AII & CII Spec. Apps. - Chemical (976 KB)
Manifold - EDS5-F03a1 (113 KB)
AII & CII Spec. Apps. - Energy (176 KB)
AII & CII Spec. Apps. - Food Pha (634 KB)
1

Fuji Electric Differential Pressure Transmitters

 

FCX-CII TRANSMITTERS

Differential Pressure

  • High reliability micro-capacitance silicon cells
  • Static Pressure to 140 Bar on dp ranges
  • Accuracy, +/-0.1% of calibrated span
  • Exceptional resistance to harsh environments
  • Hart® 5.2 multi-drop communication
  • Versatile indicator with 5-digit display
  • Field repair possible with common spare parts
  • Built-in loop calibration facility
  • Large installed base
  • FCX CII Differential Pressure Transmitter

    The Fuji Electric FCX-CII  is a high performance low cost differential pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
         
    The Fuji Electric FCX series of differential pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

    Differential pressure measurement can be used to measure flow, level, density and viscosity. This versatile primary measurement can provide high accuracy results in harsh process and environmental conditions. for more information on these applications why not call us now on +44 (0) 1202 480303 

    FCX-AII TRANSMITTERS


    Differential Pressure 

    • High reliability micro-capacitance silicon cell
    • Static Pressure to 800 Bar on dp ranges
    • High accuracy, +/-0.07% of calibrated span
    • Exceptional resistance to harsh environments
    • Hart® 5.2 multi-drop communication
    • Versatile indicator with 5-digit display
    • Field repair possible with common spare parts
    • Built-in loop calibration facility
    • Large installed base
                    
       

    The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series. The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

    To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

    transmitter_enquiry

    The above information should only be used as a guide.

    For further information, please download our datasheet.
     

    Data Sheet

    2 Downloads

    CII Series  DP - EDSF6 85 (200 KB)
    AII Series DP - EDSF6 114 (187 KB)

    Colour Brochure

    One Download

    FCX AII/CII series Pressure transmitters (1333 KB)

    Instruction manual

    No Downloads have been defined.

    Price List

    No Downloads have been defined.

    Fuji Electric Differential Pressure Transmitters
    for high pressure applications

     

    FCX-AII High Static TRANSMITTER

    Differential Pressure

    • High reliability micro-capacitance silicon cell
    • Static Pressure to 1035 Bar (15000psi) on dp ranges
    • High accuracy, +/-0.07% of calibrated span
    • Exceptional resistance to harsh environments
    • Hart® 5.2 multi-drop communication
    • Versatile indicator with 5-digit display
    • Field repair possible with common spare parts
    • Built-in loop calibration facility
    • Installed on several North Sea platforms
    • Available in exotic materials with remote seals
    • Wetted parts in SS 316L, Hast C 276, Duplex, Monel, Tantilum, or others on request
    • Differential pressure range : 0 to130 mbar/30bar
    • All welded construction; no gaskets
    • Process connection - autoclave or chemical seals (API, RTJ, ANSI, DIN, etc..)
    • ATEX approved
    • Optional SS 316 electronics housing
    • Bolts & nuts in SS 660
    • NACE compatibility
    • PED conformity category IV module H1
    High_static_transmitter

     

    The FCX-AII transmitter is the only DP transmitter of its type with a design static pressure of 1000Bar.

    Oil & Gas producers are drilling to new depths to keep up with demand, but this creates problems for traditional differential pressure transmitters, that are not designed to operate above 6000PSI (414 barg).

    Based on extensive experience of supplying transmitters for this demanding application, Fuji Electric is proud to announce the release of its latest Differential Pressure Transmitter which has is specifically designed to solve customer's requirements in high pressure applications.
    Each transmitter design is application specific.

    To provide high flexibility, Remote Seals can be fitted to any of the FCX series of transmitters. For further information please see relevant datasheet.

    transmitter_enquiry


    The above information should only be used as a guide.

    For further information please download our Data Sheet.

    Data Sheet

    2 Downloads

    CII Series  DP - EDSF6 85 (200 KB)
    AII Series DP - EDSF6 114 (187 KB)

    Sales brochure

    One Download

    FCX AII/CII series Pressure transmitters (1333 KB)

    Instruction manual

    No Downloads have been defined.

    Price List

    No Downloads have been defined.

    FCX-CII TRANSMITTERS
     
    Gauge Pressure


                             

  • High reliability micro-capacitance silicon cells
  • Accuracy, +/-0.1% of calibrated span
  • Exceptional resistance to harsh environments
  • Hart® 5.2 multi-drop communication
  • Versatile indicator with 5-digit display
  • Field repair possible with common spare parts
  • Built-in loop calibration facility
  • Large installed base
  • FCX CII Gauge Pressure Transmitter


    The Fuji Electric FCX-CII  is a high performance low cost pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
         
    The Fuji Electric FCX series of pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

    To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

    The above information should only be used as a guide.

    For further information, please download our datasheet.

     

    FCX-AII TRANSMITTERS


    Gauge Pressure 

    • High reliability micro-capacitance silicon cell
    • High accuracy, +/-0.07% of calibrated span
    • Exceptional resistance to harsh environments
    • Hart® 5.2 multi-drop communication
    • Versatile indicator with 5-digit display
    • Field repair possible with common spare parts
    • Built-in loop calibration facility
    • Large installed base
                    
       

    The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series.
     
     
    The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

    To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

    transmitter_enquiry

     

    The above information should only be used as a guide.

    For further information, please download our datasheet.

    Data sheet

    3 Downloads

    CII Series GP - EDSF5-68 (148 KB)
    AII Series GP -  EDSF5-80 (172 KB)
    CII GP Remote Seal, EDSF6-04 (309 KB)

    Instruction manual

    No Downloads have been defined.

    Sales brouchure

    8 Downloads

    AII  - A2SERIE (457 KB)
    CII  - C2SERIE (479 KB)
    AII & CII Spec. Apps. - Chemical (976 KB)
    AII & CII Spec. Apps. - Energy (176 KB)
    AII & CII Spec. Apps. - Food Pha (634 KB)
    AII & CII Spec. Apps. - Oil gas (460 KB)
    AII & CII Spec. Apps. - Pulp pap (710 KB)
    FCX AII/CII series colour brochure (4209 KB)

    Price List

    No Downloads have been defined.

    FCX-CII TRANSMITTERS
     
    Absolute Pressure


                             

  • High reliability micro-capacitance silicon cells
  • Accuracy, +/-0.1% of calibrated span
  • Exceptional resistance to harsh environments
  • Hart® 5.2 multi-drop communication
  • Versatile indicator with 5-digit display
  • Field repair possible with common spare parts
  • Built-in loop calibration facility
  • Large installed base
  • FCX AII AP


    The Fuji Electric FCX-CII  is a high performance low cost pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
         
    The Fuji Electric FCX series of pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

    To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

    The above information should only be used as a guide.

    For further information, please download our datasheet.

     

    FCX-AII TRANSMITTERS


    Absolute Pressure 

    • High reliability micro-capacitance silicon cell
    • High accuracy, +/-0.07% of calibrated span
    • Exceptional resistance to harsh environments
    • Hart® 5.2 multi-drop communication
    • Versatile indicator with 5-digit display
    • Field repair possible with common spare parts
    • Built-in loop calibration facility
    • Large installed base
                    
       

    The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series.
     
     
    The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

    To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

    transmitter_enquiry

     

    The above information should only be used as a guide.

    For further information, please download our datasheet.

    The FCX range of pressure transmitters can be summarised as follows

    Family          Type                         Accuracy          Model
    FCX CII        Differential Pressure    0.1%              FKK
    FCX CII        Gauge Pressure          0.1%              FKP
    FCX CII        Absolute Pressure       0.2%              FKH

    FCX AII        Differential Pressure    0.075%          FKC
    FCX AII        Gauge Pressure          0.075%          FKG
    FCX AII        Absolute Pressure       0.075%          FKA

    Data sheet

    2 Downloads

    CII Abs. - EDSF5 66 (142 KB)
    AII Abs. - EDSF5 79 (160 KB)

    Instruction manual

    3 Downloads

    AII - IMFCXA2 (1532 KB)
    CII - IMFCXC2 (1382 KB)
    HHC - IMFXWf (555 KB)

    Sales brochures

    8 Downloads

    AII  - A2SERIE (457 KB)
    CII  - C2SERIE (479 KB)
    AII & CII Spec. Apps. - Chemical (976 KB)
    AII & CII Spec. Apps. - Energy (176 KB)
    AII & CII Spec. Apps. - Food Pha (634 KB)
    AII & CII Spec. Apps. - Oil gas (460 KB)
    AII & CII Spec. Apps. - Pulp pap (710 KB)
    FCX AII/CII series colour brochure (4209 KB)

    Price List

    No Downloads have been defined.

     
     
     
     
    Home Page
    Products
    Transmitters
    Pressure
    Pressure Transmitter Support
    Gauge Transmitter
    General Purpose
    OEM Applications
    Absolute Transmitter
    DP Transmitter
    Pneumatic Transmitter
    Accessories
    Old Fuji Transmitter
    Temperature
    Level
    Flow
    Flowmeters
    Switches
    Signal Conditioners
    Indicators