Long Term Stability, High Accuracy Pressure Transmitter
Fuji Electric FCX-AII Version 5 Highlights:
Up to 0.04% accuracy
Unrivalled Long term stability: +/- 0.1% / 10 Years
DP Transmitters for Static Pressure up to 1035 Bar (15000 psi)
We are proud to introduce Fuji Electric's new range of Differential, Gauge and Absolute Pressure Transmitters. Click on one of the buttons below to access details on different types of pressure measurement:For information on previous version of Fuji Transmitter (version4) click hereVersion 5 operating principle:The micro machined silicon sensor is based on two capacitance values that change when differential pressure is applied. This technology minimises the influence of temperature fluctuations on the differential pressure measurement.
|  |
Keeping things "micro" reduces environmental influences. 
| By "floating" the cell in silicon oil from the high pressure side of the transmitter, the cell is provided with its own laboratory conditions. This isolates it from the influence of pressure and temperature fluctuations. By using microbore technology the volume of silicone oil is minimised, which further reduces the influence of temperature on the pressure measurement.
|
The combination of micro machined silicon and "floating" cell technology allow Fuji Electric to manufacture pressure transmitters with the following specifications: High Accuracy Over the long term
Up to 0.04% accuracy
Unrivalled Long term stability: +/- 0.1% / 10 Years
DP Transmitters for Static Pressure up to 1035 Bar (15000 psi) | 
|
| Ease of use
Configuration can be performed using 3 push buttons on the LCD indicator, hand held communicator or PC software.
|
Application Flexibility
Applications in HVAC, water treatment, food, paper, pharmaceutical, chemical, petrochemical, offshore, sub-sea and nuclear industries can be satisfied by this range of transmitters.
By selecting from a large range of materials, we are able to customise
the transmitter and supply remote seals. We temperature compensate the whole
assembly to maintain the highest level of performance. Selecting from
316SS, Hastelloy, Monel, Tantalum, Gold and Ceramic we can custom build
a transmitter to our own high standards, or to your individual specifications.
| 
|
| Asset Management
Enhanced configuration & maintenance tools are provided via PC
software. This can be used to track calibration changes to each
transmitter and store as data to your hard drive , or other storage
device. |
Communication protocols, Hazardous Approvals & Conformity
The FCX AII Version 5 transmitter supports a number of digital communication protocols. This ensures compatibility with existing Distributed Control Systems (DCS) or asset management systems (AMS).
This range of transmitters has also been tested for use in hazardous areas by ATEX and a large range of other international standards authorities.
Applications that require Health and Safety approval are addressed through compliance with IEC 61508/SIL2 and RoHS approvals.
| 
|
Common Specifications
| Diaphragm materials
| SS316L, hastelloy-C, monel, tantalum, zirconium, titanium, double coated with gold and ceramic
| Elevation/suppression
| -100 to +100%URL
| Span measuring range
| 100 to 1/100 URL
| Liquid contacting temperature
| -40 to 120ºC
| Ambient temperature
| -40 to 85ºC
| Output signal / Allowable load resistance
| DC 4 to 20mA / 600 Ohm
| Supply voltage
| DC 10.5 to 45V
| Long-term stability
| ±0.1% URL/10 years
| Explosion-proof specification
| Flameproof, intrinsic safety type
| Mounting method
| 50A pipe mounting, direct mounting
| Weight
| 2.9Kg (standard unit)
|
For more details and datasheets, please select a pressure measurement type below
Download Listing |
One Download |
|
|
