Fuji Electric FCX-AII V5 Differential Pressure Transmitters

The Fuji Electric FCX-AII V5 series of differential pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications. Fuji Electric transmitters are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants. They have European, American, Russian and Chinese approvals. Field repair is possible using only one amplifier for all pressure transmitter types.

Highlights  High reliability micro-capacitance silicon cell Long Term stability: +/- 0.1% URL / 10 Years Static Pressure to 1035 Bar (15000psi) on dp ranges High accuracy, up to +/-0.04% of calibrated span (0.065% as standard) Versatile indicator with push button programming Exceptional resistance to harsh environments Hart® 5.2 multi-drop communication Field repair possible with common spare parts Built-in loop calibration facility Large installed base

Application flexibility

Differential pressure transmitters can be used to measure, flow, density, viscosity and level.

Flow measurement, DP transmitters measure the pressure drop accross orifice plates, venturi tubes, pitot tubes or some other form of primary flow element. In these applications there is a square law relationship between the differential pressure and the flowrate. When specifying a dP transmitter for a flow applications the type of fluid, line pressure and temperature as well as flow trundown should be known.

Fuji Electric have recently released the worlds first DP transmitter which will measure differential pressure at line pressures up to 1035 barg!. This "high static pressure" device is particulary useful in the oil and gas industry as producers drill to new depths to recover product.

Density Measurement, DP transmitters measure the difference in pressure between two points in a vertical plane. The density being proportional to the difference in pressure.

Viscosity Measurement, in this application a fixed flowrate is pumped through an orifice plate at a constant rate using a positive displacement pump at a known telperature and pressure. By measuring the differential pressure accross the orifice plate, the viscosity of the fluid can be measured.

Level Measurement, in this application the level in a sealed tank can be measured by comparing the pressure at the top of the tank, with the pressure at (or near) the bottom of the tank. fuji Electric DP transmitters have the capability to compensate for tanks with irregular shapes.

High Static DP transmitters, The FCX-AII V5 transmitter is the only DP transmitter of its type with a design static pressure of 1035Bar. Oil & Gas producers are drilling to new depths to keep up with demand, but this creates problems for traditional differential pressure transmitters, that are not designed to operate above 6000PSI (414 barg). Based on extensive experience of supplying transmitters for this demanding application, Fuji Electric is proud to announce the release of its latest Differential Pressure Transmitter which has is specifically designed to solve customer's requirements in high pressure applications. Each transmitter design is application specific. To provide high flexibility, Remote Seals can be fitted to any of the FCX series of transmitters. Wetted parts in SS 316L, Hast C 276, Duplex, Monel, Tantalum, or others on request

Please note that there is no datasheet available for high static transmitters. These transmitters are custom built on an application by application basis.

For transmitters to suit any of the above applications, please do not hesitate to contact us.

Fuji_Electric_V5_Transmiter_Brochure

Fuji_FKC_DP_Transmitter_datasheet

Fuji_FKB,D,M-remote_seal_transmitter