Fuji FCX CII & AII previous version (V4) of pressure transmitters

You will find below information and datasheet about the previous version (version 4) of Fuji Transmitters

Highly precise differential and other pressure, fluid flow, and liquid level measurements with Fuji electronic transmitters.

Since we released our first smart transmitter in late 1980's, with its reliable performance based on our original unique measuring principle, the "ADVANCED FLOATING CELL", Fuji FCX and FCX-A/C transmitters have been chosen by many customers all over the world. Over 500,000 units in various industrial processes and services show excellent reliability and performance of our transmitter.

To respond to increasing demands of reliability and accuracy, we now offer you much more accurate, and flexible series of transmitters -FCX-AII series.

Differential Pressure transmitters from Fuji Electric

Differential pressure transmitters can be used to measure, flow, density, viscosity and level.

Flow measurement, DP transmitters measure the pressure drop accross orifice plates, venturi tubes, pitot tubes or some other form of primary flow element. In these applications there is a square law relationship between the differential pressure and the flowrate. When specifying a dP transmitter for a flow applications the type of fluid, line pressure and temperature as well as flow trundown should be known.

Fuji Electric have recently released the worlds first DP transmitter which will measure differential pressure at line pressures up to 1035 barg!. This "high static pressure" device is particulary useful in the oil and gas industry as producers drill to new depths to recover product.

Density Measurement, DP transmitters measure the difference in pressure between two points in a vertical plane. The density being proportional to the difference in pressure.

Viscosity Measurement, in this application a fixed flowrate is pumped through an orifice plate at a constant rate using a positive displacement pump at a known telperature and pressure. By measuring the differential pressure accross the orifice plate, the viscosity of the fluid can be measured.

Level Measurement, in this application the level in a sealed tank can be measured by comparing the pressure at the top of the tank, with the pressure at (or near) the bottom of the tank. fuji Electric DP transmitters have the capability to compensate for tanks with irregular shapes.

For transmitters to suit any of the above applications, please dont hesitate to contact us.

Other transmitters in the Fuji Electric range are ssure and Differential Pressure Transmitters available from Fuji Electric

The FCX range of pressure transmitters can be summarised as follows

Family Type Accuracy Model
 

AII & CII Spec. Apps. - Oil gas

AII & CII Spec. Apps. - Pulp pap

AII Remote Seal - EDSF6 03

FCX AII/CII series colour brochure

Seals_Pricing_2008

Fuji Electric Differential Pressure Transmitters

FCX-CII TRANSMITTERS

Differential Pressure

High reliability micro-capacitance silicon cells Static Pressure to 140 Bar on dp ranges Accuracy, +/-0.1% of calibrated span Exceptional resistance to harsh environments Hart® 5.2 multi-drop communication Versatile indicator with 5-digit display Field repair possible with common spare parts Built-in loop calibration facility Large installed base

The Fuji Electric FCX-CII  is a high performance low cost differential pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
     
The Fuji Electric FCX series of differential pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

Differential pressure measurement can be used to measure flow, level, density and viscosity. This versatile primary measurement can provide high accuracy results in harsh process and environmental conditions. for more information on these applications why not call us now on +44 (0) 1202 480303 

FCX-AII TRANSMITTERS

Differential Pressure 

• High reliability micro-capacitance silicon cell
• Static Pressure to 800 Bar on dp ranges
• High accuracy, +/-0.07% of calibrated span
• Exceptional resistance to harsh environments
• Hart® 5.2 multi-drop communication
• Versatile indicator with 5-digit display
• Field repair possible with common spare parts
• Built-in loop calibration facility
• Large installed base
                
   

The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series. The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

The above information should only be used as a guide.

For further information, please download our datasheet.
 

CII Series DP - EDSF6 85

AII Series DP - EDSF6 114

FCX AII/CII series Pressure transmitters

Fuji Electric Differential Pressure Transmitters
for high pressure applications

FCX-AII High Static TRANSMITTER

Differential Pressure

High reliability micro-capacitance silicon cell Static Pressure to 1035 Bar (15000psi) on dp ranges High accuracy, +/-0.07% of calibrated span Exceptional resistance to harsh environments Hart® 5.2 multi-drop communication Versatile indicator with 5-digit display Field repair possible with common spare parts Built-in loop calibration facility Installed on several North Sea platforms Available in exotic materials with remote seals Wetted parts in SS 316L, Hast C 276, Duplex, Monel, Tantilum, or others on request Differential pressure range : 0 to130 mbar/30bar All welded construction; no gaskets Process connection - autoclave or chemical seals (API, RTJ, ANSI, DIN, etc..) ATEX approved Optional SS 316 electronics housing Bolts & nuts in SS 660 NACE compatibility PED conformity category IV module H1

The FCX-AII transmitter is the only DP transmitter of its type with a design static pressure of 1000Bar.

To provide high flexibility, Remote Seals can be fitted to any of the FCX series of transmitters. For further information please see relevant datasheet.

The above information should only be used as a guide.

For further information please download our Data Sheet.

CII Series DP - EDSF6 85

AII Series DP - EDSF6 114

FCX AII/CII series Pressure transmitters

FCX-CII TRANSMITTERS
 
Gauge Pressure

High reliability micro-capacitance silicon cells Accuracy, +/-0.1% of calibrated span Exceptional resistance to harsh environments Hart® 5.2 multi-drop communication Versatile indicator with 5-digit display Field repair possible with common spare parts Built-in loop calibration facility Large installed base

The Fuji Electric FCX-CII  is a high performance low cost pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
     
The Fuji Electric FCX series of pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

The above information should only be used as a guide.

For further information, please download our datasheet.

FCX-AII TRANSMITTERS

Gauge Pressure 

• High reliability micro-capacitance silicon cell
• High accuracy, +/-0.07% of calibrated span
• Exceptional resistance to harsh environments
• Hart® 5.2 multi-drop communication
• Versatile indicator with 5-digit display
• Field repair possible with common spare parts
• Built-in loop calibration facility
• Large installed base
                
   

The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series.
 
 
The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

The above information should only be used as a guide.

For further information, please download our datasheet.

CII Series GP - EDSF5-68

AII Series GP - EDSF5-80

CII GP Remote Seal, EDSF6-04

AII - A2SERIE

CII - C2SERIE

AII & CII Spec. Apps. - Chemical

AII & CII Spec. Apps. - Energy

AII & CII Spec. Apps. - Food Pha

AII & CII Spec. Apps. - Oil gas

AII & CII Spec. Apps. - Pulp pap

FCX AII/CII series colour brochure

FCX-CII TRANSMITTERS
 
Absolute Pressure

High reliability micro-capacitance silicon cells Accuracy, +/-0.1% of calibrated span Exceptional resistance to harsh environments Hart® 5.2 multi-drop communication Versatile indicator with 5-digit display Field repair possible with common spare parts Built-in loop calibration facility Large installed base

The Fuji Electric FCX-CII  is a high performance low cost pressure transmitter.  This is achieved by offering only stainless steel wetted parts and mid-range measuring cells.  For high/low pressure ranges, or exotic materials, select the FCX-AII.
     
The Fuji Electric FCX series of pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.  They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.  They have European, American, Russian and Chinese approvals.  Field repair is possible using only one amplifier for all pressure transmitter types.

To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

The above information should only be used as a guide.

For further information, please download our datasheet.

FCX-AII TRANSMITTERS

Absolute Pressure 

• High reliability micro-capacitance silicon cell
• High accuracy, +/-0.07% of calibrated span
• Exceptional resistance to harsh environments
• Hart® 5.2 multi-drop communication
• Versatile indicator with 5-digit display
• Field repair possible with common spare parts
• Built-in loop calibration facility
• Large installed base
                
   

The FCX-AII transmitter is a full specification instrument that can be supplied to meet most applications.  If a mid-range transmitter is required.  Then we recommend the lower cost FCX-CII series.
 
 
The FCX-AII is recognised as a world leader for low draft range measurements or for dp measurements at very high static pressure.   

To provide high flexibility, remote seals can be fitted to any of the FCX series of transmitters.  For further information, please see relevant datasheet.

The above information should only be used as a guide.

For further information, please download our datasheet.

The FCX range of pressure transmitters can be summarised as follows

Family          Type                         Accuracy          Model
FCX CII        Differential Pressure    0.1%              FKK
FCX CII        Gauge Pressure          0.1%              FKP
FCX CII        Absolute Pressure       0.2%              FKH

CII Abs. - EDSF5 66

AII Abs. - EDSF5 79

AII - IMFCXA2

CII - IMFCXC2

HHC - IMFXWf

AII - A2SERIE

CII - C2SERIE

AII & CII Spec. Apps. - Chemical

AII & CII Spec. Apps. - Energy

AII & CII Spec. Apps. - Food Pha

AII & CII Spec. Apps. - Oil gas

AII & CII Spec. Apps. - Pulp pap

FCX AII/CII series colour brochure